Utah Water Wells

Water Wells in Naples, Utah

Drilling cost and typical depth for residential water wells in Naples, Uintah County.

Updated 2026-05-11 · By Utah Water Wells — based on real driller-submitted logs from the Utah Division of Water Rights.

100 ft
Typical depth
$13,500
Typical cost
Get a real estimate for your Naples property

Pre-fills the calculator to Naples. Add your full address to anchor on your specific lot.

Run my address

About wells in Naples

Naples sits in Uintah County. Domestic wells in this area typically complete around 100 feet, with site-to-site variation of about ±20%.

Local hydrogeology: The primary water-bearing formation here is the Uinta Basin alluvial and Tertiary aquifers. Uintah County has many shallow productive wells in the Vernal area thanks to historic artesian zones. Modern domestic wells typically run 80-300 ft. Some areas have hydrocarbon-related quality concerns.

For more on this region, see our depth-by-county guide and the Uintah County page.

Other cities in Uintah County

Vernal
100 ft typical · 3 mi
Related

FAQ

How much does a water well cost in Naples?

Domestic wells in Naples typically cost about $13,500 at the local ~100 ft typical depth and the 2026 rate of $135 per foot. Use the calculator with your address for a precise estimate.

How deep are wells in Naples?

Most domestic wells around Naples hit good water at around 100 ft, though depth varies block-by-block. The calculator pulls your specific neighbors' completion depths.

Who can drill a well in Naples?

Any licensed Utah Well Driller can drill in Naples. We route leads to a partner driller serving the county. All work must comply with Utah Administrative Rule R655-4.