Utah Water Wells

Well Pump Replacement in Salt Lake County, Utah

Send the details of your Salt Lake County well and Wasatch Drilling will email you a real estimate — no high-pressure sales calls.

📞 Or call
(435) 538-4303
Talk to Wasatch Drilling directly

✓ Request sent

Pump replacement in Salt Lake County

Most domestic wells in Salt Lake County run around 350 ft, drawing from the Salt Lake Valley principal aquifer. Pumps in this area are typically set near the bottom — meaning a replacement requires pulling the full drop pipe.

Total cost for a pump replacement in Salt Lake County usually lands in the $2,500-$6,000 range, depending on horsepower, pump set depth, and whether ancillary parts (pressure switch, tank, wiring) need replacement at the same time.

Pump Replacement Estimate by city in Salt Lake County

Also available:

FAQ — Pump Replacement Estimate in Salt Lake County

How much does it cost to replace a well pump in Salt Lake County, Utah?

Pump-replacement cost in Salt Lake County typically ranges from $2,500 to $6,000 depending on well depth, pump horsepower, and whether the pressure tank or wiring also need work. The deeper your pump is set, the higher the labor cost to pull and reinstall.

How long does a well pump last in Salt Lake County?

Submersible well pumps in Salt Lake County typically last 12-18 years. High-mineral water, frequent cycling, and undersized pumps shorten lifespan. If your pump is over 15 years old, planning for replacement before it fails saves on emergency dispatch fees.

What size pump do I need for my Salt Lake County property?

Pump sizing depends on well yield (GPM), depth to water (TDH calculation), and household demand. Most Salt Lake County domestic wells use a 3/4 HP or 1 HP submersible pump set 20-40 ft below the static water level. We size your replacement based on your existing well log.

Can you give me an exact quote without visiting my Salt Lake County property?

We can give a tight estimate from your address and well log alone — usually within ±10% of the final price. Final pricing locks in after a brief site visit to confirm pump access, electrical setup, and any code-required upgrades.