Utah Water Wells

Water Wells in Castle Dale, Utah

Drilling cost and typical depth for residential water wells in Castle Dale, Emery County.

Updated 2026-05-11 · By Utah Water Wells — based on real driller-submitted logs from the Utah Division of Water Rights.

250 ft
Typical depth
$33,750
Typical cost
Get a real estimate for your Castle Dale property

Pre-fills the calculator to Castle Dale. Add your full address to anchor on your specific lot.

Run my address

About wells in Castle Dale

Castle Dale sits in Emery County. Domestic wells in this area typically complete around 250 feet, with site-to-site variation of about ±20%.

Local hydrogeology: The primary water-bearing formation here is the Castle Valley basin-fill and bedrock aquifers. Emery County wells run 150-500 ft typically. Castle Valley alluvial water is reliable; mesa and bedrock areas need deeper completion through harder formations.

For more on this region, see our depth-by-county guide and the Emery County page.

Other cities in Emery County

Huntington
250 ft typical · 9 mi
Related

FAQ

How much does a water well cost in Castle Dale?

Domestic wells in Castle Dale typically cost about $33,750 at the local ~250 ft typical depth and the 2026 rate of $135 per foot. Use the calculator with your address for a precise estimate.

How deep are wells in Castle Dale?

Most domestic wells around Castle Dale hit good water at around 250 ft, though depth varies block-by-block. The calculator pulls your specific neighbors' completion depths.

Who can drill a well in Castle Dale?

Any licensed Utah Well Driller can drill in Castle Dale. We route leads to a partner driller serving the county. All work must comply with Utah Administrative Rule R655-4.