Water Wells in Kaysville, Utah

Q: Who can drill a well in Kaysville?

Any licensed Utah Well Driller can drill in Kaysville. All work must comply with Utah Administrative Rule R655-4.

Drilling cost and typical depth for residential water wells in Kaysville, Davis County.

Updated 2026-05-11 · By Utah Water Wells — based on real driller-submitted logs from the Utah Division of Water Rights.

250 ft

Typical depth

$33,750

Typical cost

Get a real estimate for your Kaysville property

Pre-fills the calculator to Kaysville. Add your full address to anchor on your specific lot.

Run my address

About wells in Kaysville

Kaysville sits in Davis County. Domestic wells in this area typically complete around 250 feet, with site-to-site variation of about ±20%.

Local hydrogeology: The primary water-bearing formation here is the East Shore alluvial aquifer. Davis County is largely on municipal water but bench and east-side lots sometimes drill domestic wells reaching 150-400 ft into the East Shore aquifer system.

For more on this region, see our depth-by-county guide and the Davis County page.

Other cities in Davis County

Layton

250 ft typical · 2 mi

Farmington

240 ft typical · 5 mi

Bountiful

220 ft typical · 11 mi

FAQ

How much does a water well cost in Kaysville?

Domestic wells in Kaysville typically cost about $33,750 at the local ~250 ft typical depth and the 2026 rate of $135 per foot. Use the calculator with your address for a precise estimate.

How deep are wells in Kaysville?

Most domestic wells around Kaysville hit good water at around 250 ft, though depth varies block-by-block. The calculator pulls your specific neighbors' completion depths.

Who can drill a well in Kaysville?

Any licensed Utah Well Driller can drill in Kaysville. We route leads to a partner driller serving the county. All work must comply with Utah Administrative Rule R655-4.