Water Wells in Mount Pleasant, Utah

Drilling cost and typical depth for residential water wells in Mount Pleasant, Sanpete County.

Updated 2026-05-11 · By Utah Water Wells — based on real driller-submitted logs from the Utah Division of Water Rights.

250 ft

Typical depth

$33,750

Typical cost

Get a real estimate for your Mount Pleasant property

Pre-fills the calculator to Mount Pleasant. Add your full address to anchor on your specific lot.

Run my address

About wells in Mount Pleasant

Mount Pleasant sits in Sanpete County. Domestic wells in this area typically complete around 250 feet, with site-to-site variation of about ±20%.

Local hydrogeology: The primary water-bearing formation here is the Sanpete Valley alluvial aquifer. Sanpete Valley domestic wells typically run 150-400 ft. The valley is a long alluvial trough between the Wasatch Plateau and the central highlands; mountain-edge wells go deeper through bedrock.

For more on this region, see our depth-by-county guide and the Sanpete County page.

Other cities in Sanpete County

Ephraim

250 ft typical · 15 mi

Manti

250 ft typical · 22 mi

FAQ

How much does a water well cost in Mount Pleasant?

Domestic wells in Mount Pleasant typically cost about $33,750 at the local ~250 ft typical depth and the 2026 rate of $135 per foot. Use the calculator with your address for a precise estimate.

How deep are wells in Mount Pleasant?

Most domestic wells around Mount Pleasant hit good water at around 250 ft, though depth varies block-by-block. The calculator pulls your specific neighbors' completion depths.

Who can drill a well in Mount Pleasant?

Any licensed Utah Well Driller can drill in Mount Pleasant. We route leads to a partner driller serving the county. All work must comply with Utah Administrative Rule R655-4.