Water Wells in Nephi, Utah

Q: Who can drill a well in Nephi?

Any licensed Utah Well Driller can drill in Nephi. All work must comply with Utah Administrative Rule R655-4.

Drilling cost and typical depth for residential water wells in Nephi, Juab County.

Updated 2026-05-11 · By Utah Water Wells — based on real driller-submitted logs from the Utah Division of Water Rights.

350 ft

Typical depth

$47,250

Typical cost

Get a real estimate for your Nephi property

Pre-fills the calculator to Nephi. Add your full address to anchor on your specific lot.

Run my address

About wells in Nephi

Nephi sits in Juab County. Domestic wells in this area typically complete around 350 feet, with site-to-site variation of about ±20%.

Local hydrogeology: The primary water-bearing formation here is the Juab Valley basin-fill aquifer. Juab Valley wells typically run 200-500 ft, completing in basin-fill sand and gravel. Multiple stacked aquifers exist; some wells tap the deeper confined zone for higher yield.

For more on this region, see our depth-by-county guide and the Juab County page.

FAQ

How much does a water well cost in Nephi?

Domestic wells in Nephi typically cost about $47,250 at the local ~350 ft typical depth and the 2026 rate of $135 per foot. Use the calculator with your address for a precise estimate.

How deep are wells in Nephi?

Most domestic wells around Nephi hit good water at around 350 ft, though depth varies block-by-block. The calculator pulls your specific neighbors' completion depths.

Who can drill a well in Nephi?

Any licensed Utah Well Driller can drill in Nephi. We route leads to a partner driller serving the county. All work must comply with Utah Administrative Rule R655-4.