Well Pump Replacement in Davis County, Utah
Send the details of your Davis County well and Wasatch Drilling will email you a real estimate — no high-pressure sales calls.
✓ Request sent
Pump replacement in Davis County
Most domestic wells in Davis County run around 250 ft, drawing from the East Shore alluvial aquifer. Pumps in this area are typically set near the bottom — meaning a replacement requires pulling the full drop pipe.
Total cost for a pump replacement in Davis County usually lands in the $2,500-$6,000 range, depending on horsepower, pump set depth, and whether ancillary parts (pressure switch, tank, wiring) need replacement at the same time.
Pump Replacement Estimate by city in Davis County
FAQ — Pump Replacement Estimate in Davis County
How much does it cost to replace a well pump in Davis County, Utah?
Pump-replacement cost in Davis County typically ranges from $2,500 to $6,000 depending on well depth, pump horsepower, and whether the pressure tank or wiring also need work. The deeper your pump is set, the higher the labor cost to pull and reinstall.
How long does a well pump last in Davis County?
Submersible well pumps in Davis County typically last 12-18 years. High-mineral water, frequent cycling, and undersized pumps shorten lifespan. If your pump is over 15 years old, planning for replacement before it fails saves on emergency dispatch fees.
What size pump do I need for my Davis County property?
Pump sizing depends on well yield (GPM), depth to water (TDH calculation), and household demand. Most Davis County domestic wells use a 3/4 HP or 1 HP submersible pump set 20-40 ft below the static water level. We size your replacement based on your existing well log.
Can you give me an exact quote without visiting my Davis County property?
We can give a tight estimate from your address and well log alone — usually within ±10% of the final price. Final pricing locks in after a brief site visit to confirm pump access, electrical setup, and any code-required upgrades.