Utah Water Wells

Water Wells in Daniel, Utah

Drilling cost and typical depth for residential water wells in Daniel, Wasatch County.

Updated 2026-05-11 · By Utah Water Wells — based on real driller-submitted logs from the Utah Division of Water Rights.

250 ft
Typical depth
$33,750
Typical cost
Get a real estimate for your Daniel property

Pre-fills the calculator to Daniel. Add your full address to anchor on your specific lot.

Run my address

About wells in Daniel

Daniel sits in Wasatch County. Domestic wells in this area typically complete around 250 feet, with site-to-site variation of about ±20%.

Local hydrogeology: The primary water-bearing formation here is the Heber Valley alluvial aquifer and underlying bedrock. Wasatch County water wells typically run 150-500 ft. Heber Valley floor wells are usually shallower; bench and mountain-edge wells run deeper.

For more on this region, see our depth-by-county guide and the Wasatch County page.

Other cities in Wasatch County

Heber City
220 ft typical · 2 mi
Charleston
220 ft typical · 4 mi
Midway
240 ft typical · 5 mi
Related

FAQ

How much does a water well cost in Daniel?

Domestic wells in Daniel typically cost about $33,750 at the local ~250 ft typical depth and the 2026 rate of $135 per foot. Use the calculator with your address for a precise estimate.

How deep are wells in Daniel?

Most domestic wells around Daniel hit good water at around 250 ft, though depth varies block-by-block. The calculator pulls your specific neighbors' completion depths.

Who can drill a well in Daniel?

Any licensed Utah Well Driller can drill in Daniel. We route leads to a partner driller serving the county. All work must comply with Utah Administrative Rule R655-4.