Utah Water Wells

Water Wells in Midway, Utah

Drilling cost and typical depth for residential water wells in Midway, Wasatch County.

Updated 2026-05-11 · By Utah Water Wells — based on real driller-submitted logs from the Utah Division of Water Rights.

240 ft
Typical depth
$32,400
Typical cost
Get a real estimate for your Midway property

Pre-fills the calculator to Midway. Add your full address to anchor on your specific lot.

Run my address

About wells in Midway

Midway sits in Wasatch County. Domestic wells in this area typically complete around 240 feet, with site-to-site variation of about ±20%.

Local hydrogeology: The primary water-bearing formation here is the Heber Valley alluvial aquifer and underlying bedrock. Wasatch County water wells typically run 150-500 ft. Heber Valley floor wells are usually shallower; bench and mountain-edge wells run deeper.

For more on this region, see our depth-by-county guide and the Wasatch County page.

Other cities in Wasatch County

Charleston
220 ft typical · 3 mi
Heber City
220 ft typical · 3 mi
Daniel
250 ft typical · 5 mi
Related

FAQ

How much does a water well cost in Midway?

Domestic wells in Midway typically cost about $32,400 at the local ~240 ft typical depth and the 2026 rate of $135 per foot. Use the calculator with your address for a precise estimate.

How deep are wells in Midway?

Most domestic wells around Midway hit good water at around 240 ft, though depth varies block-by-block. The calculator pulls your specific neighbors' completion depths.

Who can drill a well in Midway?

Any licensed Utah Well Driller can drill in Midway. We route leads to a partner driller serving the county. All work must comply with Utah Administrative Rule R655-4.