Utah Water Wells

Water Wells in Marysvale, Utah

Drilling cost and typical depth for residential water wells in Marysvale, Piute County.

Updated 2026-05-11 · By Utah Water Wells — based on real driller-submitted logs from the Utah Division of Water Rights.

280 ft
Typical depth
$37,800
Typical cost
Get a real estimate for your Marysvale property

Pre-fills the calculator to Marysvale. Add your full address to anchor on your specific lot.

Run my address

About wells in Marysvale

Marysvale sits in Piute County. Domestic wells in this area typically complete around 280 feet, with site-to-site variation of about ±20%.

Local hydrogeology: The primary water-bearing formation here is the Sevier River alluvial and bedrock aquifers. Piute County is one of Utah's least populated. Wells typically run 150-500 ft. Sevier River valley alluvial wells are reliable; surrounding bedrock areas vary.

For more on this region, see our depth-by-county guide and the Piute County page.

Other cities in Piute County

Junction
300 ft typical · 15 mi
Related

FAQ

How much does a water well cost in Marysvale?

Domestic wells in Marysvale typically cost about $37,800 at the local ~280 ft typical depth and the 2026 rate of $135 per foot. Use the calculator with your address for a precise estimate.

How deep are wells in Marysvale?

Most domestic wells around Marysvale hit good water at around 280 ft, though depth varies block-by-block. The calculator pulls your specific neighbors' completion depths.

Who can drill a well in Marysvale?

Any licensed Utah Well Driller can drill in Marysvale. We route leads to a partner driller serving the county. All work must comply with Utah Administrative Rule R655-4.