Utah Water Wells

Water Wells in Piute County, Utah

Piute County is one of Utah's least populated. Wells typically run 150-500 ft. Sevier River valley alluvial wells are reliable; surrounding bedrock areas vary.

Updated 2026-05-11 · By Utah Water Wells — based on real driller-submitted logs from the Utah Division of Water Rights.

300 ft
Typical depth
$40,500
Typical cost
Get a real estimate for your Piute County property

Enter your address — the calculator pulls Utah DWR driller logs near you.

Run my address

About wells in Piute County

The primary water-bearing formation here is the Sevier River alluvial and bedrock aquifers. Piute County is one of Utah's least populated. Wells typically run 150-500 ft. Sevier River valley alluvial wells are reliable; surrounding bedrock areas vary.

Domestic wells in this region typically complete around 300 feet, with site-to-site variation of about ±20%. For the most accurate estimate, use the calculator with your specific address — it queries DWR driller logs within a half-mile of your property.

Cities in Piute County

Junction
300 ft typical
Marysvale
280 ft typical
Related

FAQ

How much does a water well cost in Piute County?

Domestic wells in Piute County typically cost about $40,500 at the local ~300 ft typical depth and the 2026 rate of $135 per foot. Site-specific quotes vary; use the calculator with your address.

How deep are wells in Piute County?

Most domestic wells in Piute County reach good water at around 300 ft. Depth varies with the underlying aquifer and elevation — closer-by neighbors are the best predictor.

Do I need a permit for a well in Piute County?

Yes. Utah requires a water right (or properly filed change application) before drilling, and the well must be installed by a licensed Utah Well Driller per Utah Administrative Rule R655-4. Your driller typically handles the Start Card filing with the Division of Water Rights.